I think I’ve found the issue. EDID.
The EDID or Extended Display Identification Data is a packet of information sent from a monitor or TV to the source of the video and tells the source what types of video the display can process.
Imagine for a moment that we have a receiver from 2013 – pre 4K – that contains an HDMI switch. Now imagine that one buys almost any TV today – almost all of them support 4K. Now imagine that one purchases something that produces video – BluRay player, XBox Console, Playstation, even a modern set top box. Most of these support 4K video.
So what happens if the EDID from the 4K TV passes unchanged through the NR1504 from 2013 to the video source that can produce 4K? Well the source happily produces 4K video and the NR1504 cannot pass it. Black screen? Apparently.
Was the Marantz 1504 never modifying the EDID? Or did it just start not modifying the EDID? Or did the Linux computer get a new driver that was willing to produce 4K video?
I hooked up an HD monitor to the NR1504 and hooked the Linux box back up to the Media input and voila. Everything works fine, of course.
It seems clear that in this world of ubiquitous 4K sources and displays, the Marantz NR1504 needs to be modifying the EDID or producing one of it’s own to continue to work.
I’ve used the display settings in Linux to use HD only and that works fine with the TV, but when I plugged it back into the NR1504 it still didn’t work. Oh well. Time for a new Receiver that gets 4K. But at least I can use the Linux system by plugging it directly into the TV and setting it to HD.
I’ve had a Marantz NR1504 for a couple of years at least. As you can see, it was released in 2013 and is no longer made – according to Marantz Tech Support.
My Marantz NR1504 Receiver recently took an update over the internet. Automatically. And the next time my Linux Mint System booted, the receiver refused to pass video from the Linux system. Dish Hopper and Sony Bluray player work fine. I thought the problem was the Linux Kernel Update that I’d done, so I pulled the machine out of the Entertainment system and attached another monitor to it thinking that I would need to re-install Linux Mint 18.2, but it came up fine with the other monitor. Also, I’ve swapped HDMI cable and used other Receiver input ports, and when the Linux system is attached directly to the Vizio Pseries TV, it works fine, in FREAKING 4K no less. Of course the NR1504 only supports HD, not 4K. In 4K the print is so small on my 65″ TV that I can barely see it. But it works fine and Youtube is also fine.
I accepted a software update of the kernel on my LM 18.2 system, and now it won’t boot. Probably someone rushed out a SpecterMelt fix or something. Anyway, I need to back out these kernels later than 4.4.0-98 so they aren’t boot options. If I restart now I need to go through grub advanced options to get system started.
How do I back out these recent kernels?
Update: Use the Update Manager > View > Linux Kernels to choose which ones you want and you can back them out.
Update Update: Not a crash at all. Linux was fine. The Marantz NR1504 took an update that blacked the screen. Linux works fine to other monitors and the 4K TV without problems on the latest kernel.
Yet again, something changed to break network file sharing between LM19 and Windows 10. Here’s the fix. Windows 10 could see a LM19 file share just fine, but LM19 could not see the Win 10 file shares. < Again back-dated to keep it off the front page. >
Can’t comment on the Printer issue but there have been changes in samba since Mint18.
Long version: Mint 19 and Samba File Sharing Changes
/etc/samba/smb.conf and right under the
workgroup = WORKGROUP line add this one:
Code: Select all
client max protocol = NT1
If you have Win10 on your network and it has disabled SMB1 on the server side you will not be able to connect to it.
This allows the Linux Mint 19 system to see the Windows 10 file shares.
To see the Linux Mint 19 system from the Windows 10 systems just use the Software Manager to install SAMBA and then set up a file share of say, your home folder. Be sure and change the name to something else, not just your user name. For some reason just your user name fouls up the share.
Here’s the view from the Linux Mint side:
For some reason there were two GBLM19 computers, but this was probably an artifact of the changes I was making while trying to get this to work. After a few minutes it settled down to only one that worked from Windows 10. They both worked from Linux looking in to itself.
Here is the view from the Windows 10 system:
I still cannot ping from the Linux system to the Win 10 machines. Apparently there is a fire wall issue. Well that’s for tomorrow. I can ping the LM system from the Win 10 machines.
Never works out of the box it seems.
I got up this morning, and tried to wake up my computer like I always do, but it didn’t.
As you can see, I have what I call a “Battle Chair” which you can find here and here. I’ve upgraded the computer again since 2013, and the monitor is now an ASUS PQ258Q – 2K monitor.
Well this morning, the monitor would not wake up. I rebooted the computer a couple of times. No luck.
Can’t connect between Linux and Windows10 with Samba
Here’s a Forum Post.
This appears to have worked to allow me to see windows 10 systems from Linux Mint 18.3.
I don’t think iptables-persistant is the better way around.
The correct and documented way to enforce advanced iptables commands is described on https://wiki.ubuntu.com/UncomplicatedFi … ctionality
Using that info, what solved the problem for me was to add the code bellow and the end of “/etc/ufw/after.rules” and restarting ufw:
Code: Select all
:PREROUTING ACCEPT [728:143746]
:OUTPUT ACCEPT [664:135398]
-A OUTPUT -p udp -m udp --dport 137 -j CT --helper netbios-ns
This way, there’s not need to mess with iptables-persistant and if you installed iptables-persistent you’ll need to uninstall it running sudo “apt-get purge iptables-persistent”.
Use “Sudo xed” in a terminal to get an editor so you can edit the file mentioned above. Copy / Paste the settings above at the end of the after.rules file and save it. You can safely ignore the errors about meta data that xed spits out. It’s trying to save some meta data about the formatting and of course that is nonsense when you are editing system files.
Just sharing it so I can find it from Linux.
I’m a long time user of the Qt Development Framework. But every few years, it seems to change hands and everything about how to install it changes.
I recently installed it on Linux Mint, and while it looks like it is built in, the install was anything but simple.
But now I’d like to add a feature to one of my personal programs for Windows, so here we go again. I started by trying to look up a recent YouTube video on the subject and while it was only a year or so old, and all the domains were active, it failed miserably after the install in the same way that the Linux install failed. It was unable to find a valid “Kit”. A Kit for Qt is a set of definitions so that the IDE – integrated Development Environment – can find the other tools like compilers, framework libraries, debugger and make program. Well the Youtube video I found had the same problem. The install looked like it worked, but it brought along no tools, framework or valid kits.
Well I’ve solved that, so I’m making a post here so that I remember, and maybe it will help you too.
Seems that I can never go too long without building a system. Now that Intel has been duly embarrassed by AMD bringing out some awesome mega-core systems, I just had to support AMD by building one. Intel rushed to build their Core i-9 Processors, but they are way expensive compared with the AMD alternatives.
I first considered an AMD Threadripper 1900x processor but after asking for advice from the Overclockers forum, it became clear that the 8 core 1900x was not more powerful than the earlier AMD Ryzen 1800X, and this one was on sale for about $100 off.
As you can see, I got a fancy glass case, and water cooler from Corsair, and those fancy carnival lights RAM from G.Skill. Those things are blinking away as we speak.
I have an “Equal Opportunity” network. A few Windows 10 systems and a lot of Linux Mint systems. And I obviously want to share files among my systems.
Over the years and versions, Linux Mint has gotten more friendly when sharing files with Windows systems. Samba has always been a thing, but in recent versions, Linux Mint has made it easier to get it going.
Back when I was using Ubuntu – which Linux Mint is based on – in 2008, it was a pain to get Samba going. But things are better now. Now with Linux Mint 18.2 the dialog above is what you get if you navigate to Home and then try to share your personal folder, presumably for read-only, to the rest of the network. That’s a start. Look even an install button.
Ray Kurzweil, Nick Bostrum and others have been warning of “The Singularity” for some time now.
In their scenario, an AI wakes up one day and is suddenly smarter than any human, and alone, or by coercing humans to help it, this single AI either takes over the world, or helps we poor dumb humans out of all of our problems in a flash of intelligent light.
On the other hand, Daniel Dennett talks at length on youtube and in his books about the power of culture, the power of memes and “Intuition Pumps” and other tools for thinking. It seems to me that the Singularity Folks have it wrong and Dennett is a lot closer to the truth.