Currently my attic is accessed by removing two pieces of plywood above a doorway in the garage.
The plywood panels are held in with Drywall screws. This is a problem for several reasons:
- There are two pieces of plywood rather than one. Easy fix. Just screw some small board or strips of plywood to the back to join the two pieces to make one “Door”.
- The plywood “Door” is held on with drywall screws which are difficult to remove and replace and a pain to retrieve if you drop them.
- There are no “Handles” on the plywood “Door”. That makes it more difficult than necessary to remove and replace the door.