Dust Deputy Cyclone Separator
A while back I bought and hooked up a Dust Deputy to the shop vac that I have been using to clean my pellet stove. The Dust Deputy is an after market DIY cyclone separator. And for what you get it’s pretty pricey.
The kit I got comes with two 5 gallon buckets and a hose along with the separator. But it required some ABS pipe, glue and some work to get it hooked up to the shop vac that I’d been using. Turns out that hose diameters are no where near standard on these vacuums of course. But I’ve got it going and have not had to clean the vacuum filter in over a year. I have emptied the 5 gallon bucket once in that time. But Wait There’s More. A Better Solution has arrived.
Home Depot Dustopper
The Dustopper from Home Depot is a much better solution. And Cheaper.
The left picture shows the Home Depot picture for this use of this device. Clearly a mess since you are dragging two separate canisters around your shop or other area as you clean it. That’s gotta be a pain. On the right we see a fellow who has designed a simple modification for a Ridgid vacuum to hold the Dustopper together with the vacuum. Takes less floor space and moves as one unit.
Clearly this is what I should have done. And I may yet do this.
I still cannot understand why Ridgid or some other shop vacuum company, Dyson even, has not just made a vacuum with a cyclone separator built into it. Why these nonsense add-ons? Is Dyson holding a patent that keeps others from doing it, but is not doing it themselves? Dyson does not make a vacuum suitable for cleaning shop areas after all this time.